Pulling the trigger expands your brass. Pressure does its thing, the case grows to fill the chamber, and now you’ve got a slightly out-of-spec hunk of metal that won’t load right or fit back into your gun without some convincing. That’s why resizing is step one of actual reloading.

In Part 4, I walk through what each of the four dies does, why that carbide ring on most pistol dies saves you a lot of lubing hassle, and why some folks decap before cleaning instead of during sizing. (Short version: it lets the brass cleaner scrub inside the primer pocket, and wet cases dry a lot faster with a hole in the bottom.)

Mostly though, this one is about technique. Resizing looks easy enough that you’ll be tempted to whip through a bucket of brass at full speed. Don’t. The faster you go, the more likely you are to send a case in crooked and snap a decapping pin off inside your die. Ask me how I know.

READ MORE: The Ultimate Reloading Series: Part 4 (Case Resizing)